The Wreckdiver 2+1 setup with twin regulators and 30 cubic foot staging / pony bottle, ready to fasten on the BCD. Note the left handed ScubaPro tm. regulator and second stage.
When the second stages are tied together with about one foot of bunge cord the setup is called a "necklace". This keeps the second octo close at all times.
The diver can draw 1/3 of the right tank, then 2/3 of the left tank. There will be 2/3 of the right tank to return and the diver will have 1/3 of the left tank to use for safety stops.
The back view of the Wreckdiver 2+1 tm. shows the staging pony bottle attached to the twins bracket with one band. This allows the diver to use a pony bottle or staging bottle from 6-120 cubic feet. The third bottle fits perfectly in between the two main tanks and removes easily. This fifth band can also be used to hold battery packs, tanks, or just about anything you can get a 2" web belt around!
|
Above: The very popular 13/19 cu ft. Quick Draw Pony bottle set up shown with optional web belt. This set up can be strapped on a diver's rig in seconds. Below: Typical dry suit setup (Ice Diver) with argon bottle and "Quick Draw Bracket" on left side and large 30 cu' Nitrox pony With "Quick Draw Bracket" on right. (Argon gas is used for the dry suit because of it's warming effect inside the undergarment,and having the bottle upside down keeps the hose short and out of the way.) This setup will give the diver plenty of air and warmth under the ice. When Ron Wininger of Wales Michigan goes diving he sits on the waters edge and puts on his gear! Wow - for those of us that go into warmer water this would be a challange. Thanks Ron, and friends, for the heart warming photo! Note the cooler sitting on the ice next to Ron! also the 200' or so of yellow polyethelene line, - what can I say  |
Online Catalog | Twins Instructions | New Products | Stage 30-40